Don Barone Blog
Sign up to be notified of new articles when they are published.
Become a Fan
Fishing Deep Early
Fishing Stick Worms for Bass in the Spring
How to Cast to Shallow Cover | The Lost Art
Spring Bass Fishing with the Micro Bass Grub
Small Waters | Stock a Fish; Grow a Record
How to Swim a Jig for Bass around Other Cover
4 Tips for Better Crankbait Fishing
Spinnerbait Tips for Spring Bass
Breaking Down Flats for Spring Bass
Veteran Pro Versus Young Pro Fishing Sponsorship Debate
Most Popular Posts
Five for 5 | Five Bass Fishing Rigs Every Angler Should Know
Fishing Feature | The Wired2Fish Bass Fishing Bait Selector
Possible Tennessee State Record Largemouth Caught
Bass Fishing Feature | The Alabama Rig Comes into the Limelight
The Wired2Fish Top 20 Most Influential Bass Fishing Lures List
Inside the Zoom Bait Company Factory
Five for 5 | Five Low Cost Fishing Baitcasters
Personal Experiences with Castable Umbrella Rigs for Bass Fishing
Bass Fishing Opinion | Lasting Implications of the Alabama Rig
Ethanol Nightmares in Fishing Boats
Posts by category
Alabama Rig (13)
bass fishing (527)
fishing biz (259)
fishing pro (61)
Fishing Tackle (425)
guest blog (7)
ICAST 09 (1)
ICAST 2010 (32)
ice fishing (5)
new products (175)
record fish (7)
striper fishing (4)
tackle review (196)
the Quest (2)
Monthly Fishing Articles
Technology Tip | Clean Up Your Fish Finder's Image
Posted by Jason Sealock on Wed, Jan 02, 2013 @ 07:55 AM
I've been talking electronics a lot with anglers the last month or so, and I am learning that a lot of fishermen have anxiety when it comes to
how to use electronics when fishing
. Maybe anxiety is not the right word, but they are just overwhelmed with all the settings, so they end up doing nothing except turning the graphs on and off.
Luckily for anglers, the technology is so good in fishing depth finders and chart plotters today that they work really well out of the box. But they work a whole lot better if you make a few changes to your settings to get a clear picture.
Sonar is a massively cool technology, and to me side scanning and down scanning are two even cooler technologies. Most anglers who fish from a boat have some sort of sonar, so we'll start there and save the side scan and down scan tweaks for another article.
Sonar sends a ping down to the bottom and receives the "bounce back." The softer the bottom the less return or bounce back the transducer gets from the ping. The harder the bottom or object in the cone of the ping, the more return you will get. These "returns" are then interpreted and plotted on a digital screen.
Think about it like this. Go scream in your pillow. You don't hear much. Now go stand next to the wall in your bedroom and scream at it. There is a much louder echo or "return" on your scream.
In essence what you are doing when tweaking your sonar settings is trying to capture as much return on the ping as you can. The sonar has to receive its signal amidst a multitude of interfering objects like boat turbulence from an outboard, waves, water density, sediment stirred up, other objects in the water reflecting noise, and other units on "pinging" in the same area.
It's a wonder we can see anything at all on our graphs. So I'm all about clearing up my picture when on the water so I'm not missing anything when I'm hunting fish, whatever the species.
The first thing I do to my sonar settings is set the range for the depth I'm fishing. The graph can change up and down automatically as you change depths. But if I'm only concerned about bass shallower than 40 feet and I'm fishing in 25 feet of water. I want to see the bottom but I want the full screen focused on the area I'm fishing. I don't always trust my graph to give me the full picture. Sometimes it will set it automatically to 60 feet even though I'm fishing in 30 feet. So I just manually set it to 40 and I'm rock solid fishing in depth.
Next I will bump up the sensitivity. It's probably set to Auto by default but you can manually set it to whatever level you want. To me there is no magic number. I start around 75% and work up from there. I will go up and down and watch my screen as I do to see if I'm suddenly seeing baitfish I was missing or bass or cover or if I'm just getting a lot of noise on my screen. When I find that happy medium I will go with that for a while. Different fisheries or times of the year might require different sensitivity settings.
I have the option to also adjust the colorline. The color line can tell you a lot about how dense something is that you're seeing on your sonar. Again I start by moving the colorline slider up and down until I think I am getting the clearest picture. I want to be able to see those yellow-bellied bass easily on my graph.
After I'm getting a good picture with sensitivity and colorline, I will then make sure I've only got one transducer pinging at a time in my boat. I have two units in my boat. When I pull my trolling motor. I punch the stop sonar quick key on my
. For two reasons. I don't want my transducer pinging into outer space as I run to my next spot because the transducer sometimes has a hard time locking back onto the bottom when I drop the trolling motor at the next location. By stopping and starting my ping on the transducer, it locks on immediately and I can start fishing instantly without being frustrated waiting for the sonar to figure out again that it's in the water.
The other thing I do as I move to the front deck to fish is reach down and punch the Power button on the console unit and click the Standby option. That standby option turns the back graph off without turning it off. Basically it shuts down the transducers without powering down the unit. So you can quickly get scanning again at the touch of a button but you won't have all the noise that can be caused by two graphs pinging in the same small area. The clutter is amazing as you can see in this picture.
The last thing I will do is set my noise rejection and surface clarity settings. The fact of the matter for me is I'm not looking for individual fish in 2 feet of water. So I really don't care what's immediately under the surface. I will set my noise rejection to low and surface clarity to low. And I end up getting a very clear picture when I'm fishing. I can see my lures when I drop them right under the transducer. I can watch fish literally react to my lures on the screen and work a cat and mouse game on the graph until the fish bites.
Lots of good anglers successfully vertically fish much like one would ice fishing except they do it from the bow of their boat. Having a clear picture is the key. You spent a bunch of money for tools to help you find the fish, so you owe it to yourself to get the most out of them. And remember there is no one right setting. You need to continually change your settings to get the best picture as you move from deep to shallow or change areas where more clutter may be prominent or you're getting harder or softer returns.
Great tips I will use
Posted @ Wednesday, January 02, 2013 9:09 AM by philio shadinger
Good article, I had a Humminbird 998 and 788. I watched many videos and learned a lot before my boat cracked and now I have to sell it all. I think I'm gonna make the switch to Lowrance on the next boat, but I think they are nearly equal companies with technologies, and the settings are nearly spot on. A little more user friendly on Lowrance I think
Posted @ Wednesday, January 02, 2013 9:21 AM by Austin
Agreed Austin. Folks always want to make everything a Ford -vs- Chevy thing with electronics. The fact is both companies make great units. We've used them all and we like things about each one. At the end of the day it's about getting most out of each unit and use it to its fullest capacity.
Posted @ Wednesday, January 02, 2013 9:41 AM by Jason Sealock
Of course their technologies are nearly the same...Lowrance was sued and paid a hefty fine for copyright infringement on Hunmminbird's patents...
Posted @ Wednesday, January 02, 2013 10:05 AM by Doug R.
Great information. When you do the article on down and side imaging, how about discussing different pallets and their advantages.
Posted @ Wednesday, January 02, 2013 10:16 AM by Reid
Great read Wired 2 Fish! For all you fans there will be other instruction segments as explained on there facebook page in future segments in detailed articles or videos I'm sure of!This is the one and only site I turn to for learning instruction and advice!
Posted @ Wednesday, January 02, 2013 10:34 AM by
thanks for the tip on pausing the sonar between 2 units.....
Posted @ Wednesday, January 02, 2013 3:22 PM by hd mossman
I agree with Reid, I would love to know more about pallet views on side and down scan imaging. Can't wait to read the next article, great info!!
Posted @ Wednesday, January 02, 2013 4:51 PM by Bishara
Good article & will use the info on my two HDS 5's when I get back on the water. Need to try using manule instead on Auto all the time. Thanks for the info!!!!
Posted @ Wednesday, January 23, 2013 9:25 AM by Willie McCall
Very good article. I have humminbird units and I am looking forward to reading more articles and hopefully learning how to use my units more effectively.
Posted @ Friday, January 25, 2013 8:02 PM by mike miller
Allowed tags: <a> link, <b> bold, <i> italics
Receive email when someone replies.
Subscribe to this blog by email.
Error sending email
Email sent successfully
Email To :
Your name :
Message : (maximum 200 characters)
Don Barone Blog
© 2013 Wired2fish.com